Smartport Properties
A Smartport is an interface (port, VLAN or LAG) to which a built-in (or user-defined) macro may be applied. This Smartport feature applies a preconfigured setup to a switch port based on the type of device that is trying to connect. Auto Smartport lets the switch apply these configurations to interfaces automatically when it detects the device. Smartport types refers to the types of devices, which can be attached to Smartports.
To configure the Smartport feature, follow these steps:
Procedure
Step 1 |
Click Smartport > Properties. |
Step 2 |
It will display is Telephony OUI is enabled or disabled. Auto Smartport and Telephony OUI are mutually exclusive. |
Step 3 |
Configure the following:
|
Step 4 |
Click Apply. This sets the global Smartport parameters on the device. |