Cisco Refuse to Lose Compute Hyperconverged with Nutanix (CCHC + N) M6 Ordering Guide

Available Languages

Download Options

  • PDF
    (9.5 MB)
    View with Adobe Reader on a variety of devices

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Available Languages

Download Options

  • PDF
    (9.5 MB)
    View with Adobe Reader on a variety of devices
 

 

Introduction

Cisco Compute Hyperconverged M6 Server with Nutanix Solutions

Cisco Compute Hyperconverged with Nutanix is a hyperconverged infrastructure solution integrating Cisco’s best-in-class compute (Cisco Unified Computing System), datacenter networking, and SaaS infrastructure management platform (Cisco Intersight) with Nutanix's market-leading hyperconverged storage software, Nutanix Cloud Platform The Cisco Compute Hyperconverged with Nutanix family of appliances delivers pre-configured UCS servers that are ready to be deployed as nodes to form Nutanix clusters in a variety of configurations. Each server appliance contains three software layers: UCS server firmware, hypervisor (Nutanix AHV), and hyperconverged storage software (Nutanix AOS).

Cisco Compute Hyperconverged M6 Server with Nutanix Clusters

Physically, nodes are deployed into clusters, with a cluster consisting of three or more Cisco Compute Hyperconverged Server. These are integrated into a single system by a pair of Cisco UCS® fabric interconnects, creating clusters that support general-purpose deployments and mission-critical high-performance environments.

Related image, diagram or screenshot

Related image, diagram or screenshot

Related image, diagram or screenshot

A blue and green advertisement with white and black textDescription automatically generated with medium confidence

Refuse to Lose HX to Nutanix T’s & C’s

   Must be an HX customer & a New Logo to Nutanix (Provide SAVID to determine offer eligibility)

   Nutanix Deal Registration through Cisco is mandatory (Deal Registration Approval must list New Business to Nutanix)

   Offer is valid for Cisco’s FY24 Only. Approved quotes are valid for 30 days

   Offer is available for ONE use per Customer SAVID only

   Deal MUST be registered & approved via the Qualification Form before quoting/ordering to avoid delays in approvals & shipment.

   Free items include M6 or M7 Servers & Limited Nutanix Software only.

   Nutanix Software subscription must be 3 year or above.

   Intersight is Mandatory for all free and paid nodes.

   Free Server & Nutanix Software must be the same model & configuration as the Paid Server & Software purchased.

   Eligible Nutanix Software: NCI, NCI-D, NCI-Edge (Limited to 5 VM’s per node) and Add On’s

   Offer can be applied to clusters in Intersight Standalone Mode (Non-FI) or UCSM Managed Mode (FI)

   Offer is not eligible for Nutanix Cost Relief

   Promotion does not apply to Renewals.

   Offer Approval is only valid to be used on one Cisco Deal ID.

Note:       Free Nutanix Software discount will be applied via DSA process. DO NOT QUOTE / ORDER WITHOUT REGISTERING HERE. Your Orders will be HELD if booked without approval.

Ordering is SIMPLE

   Secure your Nutanix Deal Registration approval. Please ensure the Nutanix Deal Registration approval email indicates ‘Nutanix New Business'.

   Register your deal for approval here

Note:       Please attach your Refuse to Lose Registration Approval along with your Nutanix Deal registration approval email in the Non-standard DSA process. Find DSA Process here.

   Once you have an approved Nutanix Deal registration with the new logo indicator, register your DEAL for approval on the R2L Offer Click Offer

     You will receive an offer approval which you will attach as a PDF along with your Deal registration E-Mail PDF during the non-standard DSA process

     Once approved, Order using Promo SKUs. PID: HCI-R2L-M6-OFFER (M6) and HCI-R2L-M6-OFFER (M7)

Purpose, Audience, and Scope

Purpose

This publication provides information about the ordering Cisco Compute Hyperconverged with Nutanix from CCW estimate creation.

Scope

This ordering guide describes the information for:

   Workflow from approved Nutanix Deal Registration to License fulfillment

   Ordering Structure of Cisco Compute Hyperconverged M6 Server with Nutanix

   Catalog of Product IDs of Cisco Compute Hyperconverged M6 Server with Nutanix

   Ordering Nutanix Hardware, Software Licensing and Professional Service options

   Links to additional resources

Audience

 Cisco sales teams and partners.

Workflow from Approved Nutanix Deal Registration to License fulfillment

A screenshot of a computer screenDescription automatically generated

   Every opportunity for Nutanix SW should be ideally registered with Nutanix via Nutanix Deal Registration process. Nutanix Deal registration provides Cisco Sales PSS/AM is responsible for submitting Nutanix Deal registration. Once the Deal registration is approved by Nutanix, an approval email will be sent to the Cisco Sales submitter. This approval letter will need to be attached later to the Cisco quote.

   Once the customer requirements are available, visit Nutanix Sizer tool (Nutanix Sizer) and complete the guided selling questionnaire to secure the Nutanix configuration specifications that meet the customer requirements.

   Build the configuration in CCW using top level ordering SKU HCI-R2L-M6-OFFER. Create deal using the CCW configuration, every deal that contains Nutanix SW must go through non-Standard Deal Approval process. Cisco Sales AM will need to submit non-standard deal by providing info on Nutanix Deal Registration, justification for discount request and attaching the relevant approval letter from Nutanix.

   Commercial Finance will enter the non-standard discount and approve it after the required due diligence is done for ensuring that the discount aligns to the zone discount guidelines shared by Nutanix.

   Once the non-standard deal is approved, it is available to convert to order.

   Nutanix Software is Not a Cisco Smart License. License is fulfilled by Nutanix and managed on Nutanix portal. For every order line containing Nutanix, the order submitter must enter End customer information (name, email, address) in Provisioning info screen on the CCW order line for Nutanix SKUs.

   Nutanix will send the License activation email to the end customer email ID that is entered into the provisioning info screen.

Ordering Structure of Cisco Compute Hyperconverged M6 Server with Nutanix Refuse to Lose Offer Structure

Related image, diagram or screenshot

Catalog of Product IDs (PIDs)

Note:       For a complete list of part numbers for the see the Cisco Compute Hyperconverged with Nutanix-HCIAF220 M6 All-NVMe/All-Flash Server and Cisco Compute Hyperconverged with Nutanix-HCIAF240 M6 All-Flash Server

Table 1.           PID of Major Line Bundle (MLB)

Product ID (PID)

Description

HCI-R2L-M6-OFFER

Cisco Compute Hyperconverged Refuse To Lose M6 HX Migration Offer

Table 2.           HCI Rack Server Major Line PIDs

Product ID (PID)

Description

HCIAF220C-M6SN (All NVMe)

Cisco Compute Hyperconverged HCIAF220cM6 All-NVMe server

HCIAF220C-M6SN-FRE (All NVMe)

CCHC R2L Free HCIAF220cM6 All-NVMe Free server

HCIAF240C-M6SX (All Flash)

Cisco Compute Hyperconverged HCIAF240cM6 All-Flash server

HCIAF240C-M6SX-FRE (All Flash)

CCHC R2L Free HCIAF240cM6 All-Flash Free server

HCIAF220C-M6S (All Flash)

Cisco Compute Hyperconverged HCIAF220cM6 All-Flash server

HCIAF220C-M6S-FRE (All Flash)

CCHC R2L Free HCIAF220cM6 All-Flash server

Table 3.           Fabric Interconnect Major Line PIDs

Product ID (PID)

Description

HCI-FI-6536-M6

Cisco Compute Hyperconverged Fabric Interconnect 6536

HCI-FI-64108-M6

Cisco Compute Hyperconverged Fabric Interconnect 64108

HCI-FI-6454-M6

Cisco Compute Hyperconverged Fabric Interconnect 6454

Table 4.           Nutanix Software and Professional Major Line PIDs

Product ID (PID)

Description

NTX-SW

Nutanix Software 3Y and above

NTX-SW-FRE

Nutanix R2L Free Software 3Y and above

NTX-SW-PS

Nutanix Professional Service

Table 5.           Cisco Intersight Major Line PIDs

Product ID (PID)

Description

DC-MGT-SAAS

Cisco Intersight SaaS

CNDL-DESELECT

Conditional Deselect

Step By Step Ordering Process

Note:        

     For a complete list of part numbers for the see the Cisco Compute Hyperconverged with Nutanix-HCIAF220 M6 All-NVMe/All-Flash Server and Cisco Compute Hyperconverged with Nutanix-HCIAF240 M6 All-Flash Server

   Refer to Nutanix Sizer Tool: https://sizer.nutanix.com/#/home before you proceed to do the Product Configuration.

Configuring the Hardware Components

Step 1.  

Related image, diagram or screenshot

a.     In CCW, search for HCI-R2L-M6-OFFER PID and click on “Add”

b.    Click on “Select Options” to enter the configurator.

Step 2.  

Related image, diagram or screenshot

a.     Select HCIAF220C-M6S in QTY of 3,6,9,12,15,18,21,24,27,30……300 by clicking the “PLUS”.

b.    Notice the HCIAF220C-M6S Status is now Invalid as further configuration needed.

c.     Click on “Edit Options” to enter the configurator.

Step 3.  

Related image, diagram or screenshot

a.     Configure HCIAF220C-M6S by selecting peripherals from category window on the left.

b.    PIDs are listed in the window on the right. Some PIDs like Processors, Drives and PCIe risers are grouped according to type or series; select from the grouped options located above SKU window on the right.

c.     Follow warning messages to configure the minimum required option PIDs.

d.    Click on “Done” when completed.

Step 4.   

Related image, diagram or screenshot

a.     Note Status is now showing as Valid.

b.    Increase the quantity for multiples of same configuration.

c.     Click the “PLUS” to add and configure the same product with different option/quantities or select a different product.

Step 5.  

Related image, diagram or screenshot

a.     Click on “Edit Services/Subscriptions” to edit Term Duration for HW Support.

Note:       It is recommended that Term Duration for HW Support must align with Software Subscription Duration.

Step 6.  

Related image, diagram or screenshot

a.     Enter the Term Duration

b.    Click on “Apply” and “Done”

Note:       If Nutanix Mission Critical Software Support is purchased, it is recommended that Customer upgrade to CX Success Track Level 1 or Level 2 or Solution Support to ensure consistent SLA response time between Hardware and Software. Please refer to https://www.cisco.com/c/dam/en_us/about/doing_business/legal/service_descriptions/docs/cisco-success-tracks.pdf for more information.

Step 7.  

Related image, diagram or screenshot

a.     Select Free Nodes Ex: HCIAF220C-M6S-FRE in QTY of (QTY of Paid Node / 3) by clicking the “PLUS”.

b.    Notice the HCIAF220C-M6S-FRE Status is now Invalid as further configuration needed.

c.     Click on “Edit Options” to enter the configurator.

Note:       Configuration of Paid Node and Free Node should be identical.

Step 8.  

Related image, diagram or screenshot

a.     Configure HCIAF220C-M6S-FRE by selecting peripherals from category window on the left.

b.    PIDs are listed in the window on the right. Some PIDs like Processors, Drives and PCIe risers are grouped according to type or series; select from the grouped options located above SKU window on the right.

c.     Follow warning messages to configure the minimum required option PIDs.

d.    Click on “Done” when completed.

Step 9.   

Related image, diagram or screenshot

a.     Note Status is now showing as Valid.

b.    Increase the quantity for multiples of same configuration.

c.     Click the “PLUS” to add and configure the same product with different option/quantities or select a different product.

Step 10.   

Related image, diagram or screenshot

a.     Click on “Edit Services/Subscriptions” to edit Term Duration for HW Support.

Note:       It is recommended that Term Duration for HW Support must align with Software Subscription Duration.

Step 11.   

Related image, diagram or screenshot

a.     Enter the Term Duration

b.    Click on “Apply” and “Done”

Note:       If Nutanix Mission Critical Software Support is purchased, it is recommended that Customer upgrade to CX Success Track Level 1 or Level 2 or Solution Support to ensure consistent SLA response time between Hardware and Software. Please refer to https://www.cisco.com/c/dam/en_us/about/doing_business/legal/service_descriptions/docs/cisco-success-tracks.pdf for more information.

Step 12.   

Related image, diagram or screenshot

a.     If Servers or any HW Components needs to be shipped to multiple locations using single order, user need to split the current lines in multiple lines. Example shown here..

Step 13.   

Related image, diagram or screenshot

a.     Select HCI-FI-6536-M6 ATO with 2 QTY under MLB by clicking the “PLUS”

b.    Notice the HCI-FI-6536-M6 ATO Status is “invalid” as further configuration needed.

c.     Click on “Edit Options” to enter the configurator.

Step 14.   

Related image, diagram or screenshot

a.     Configure HCI-FI-6536-M6 by selecting peripherals from window on the left. Deployment Mode, Software Image, Software License and Power Supply is default selection. Transceiver Cable and QSFP Cables are Optional selection.

b.    Power Cables are mandatory selections.

c.     Click on “Done” when completed.

Step 15.   

Related image, diagram or screenshot

a.     Note Status is now showing as “Valid”.

Step 16.   

Related image, diagram or screenshot

a.     Click on “Edit Services/Subscriptions” to edit Term Duration for HW Support.

Note:       It is recommended that Term Duration for HW Support must align with Software Subscription Duration.

Step 17.   

Related image, diagram or screenshot

a.     Enter the Term Duration

b.    Click on “Apply” and “Done”

Note:       If Nutanix Mission Critical Software Support is purchased, it is recommended that Customer upgrade to CX Success Track Level 1 or Level 2 or Solution Support to ensure consistent SLA response time between Hardware and Software. Please refer to https://www.cisco.com/c/dam/en_us/about/doing_business/legal/service_descriptions/docs/cisco-success-tracks.pdf for more information.

Configure the Software Subscription

Related image, diagram or screenshot

A blue and white text with blue arrowsDescription automatically generated with medium confidence

A close-up of a cloud infrastructure dataDescription automatically generated

A screenshot of a computerDescription automatically generated

Step 18.   

Related image, diagram or screenshot

a.     NTX-SW (Paid Nutanix Software) is pre-selected as its mandatory selection.

b.    Click on “Select Options” to configure the product.

Note:       Subscription Term for NTX-SW is 36 to 60 Months

Step 19.   

Related image, diagram or screenshot

a.     Requested Start Date (RSD) is now dependent on HW Ship Date and will automatically starts when the HW ships. If you change the RSD, the Software will start either on the RSD you picked or the HW Ship Date whichever is later.

b.    End Date (duration in months) is defaulted to 36 Months, Auto Renewal (on/off) is defaulted to Off and Billing Frequency is defaulted to Prepaid Term. You can still change the setting accordingly.

Step 20.   

Related image, diagram or screenshot

a.     For NTX-SW (Paid Nutanix Software), if Nutanix Cloud Infrastructure (NCI) or Nutanix Cloud Infrastructure Data (NCI-D) License are selected then they must match with the QTY of Processor Core selected under Paid Server. Here, QTY of Paid Server: HCIAF220C-M6S = 3. QTY of Processor: HCI-CPU-I6430 = 2 per Server i.e., 6 CPUs. Each CPU has 32 cores, total cores = 192. Hence, QTY of Nutanix Software License require = 192.

Step 21.   

Related image, diagram or screenshot

a.     For NTX-SW (Paid Nutanix Software), if Nutanix Cloud Infrastructure Edge (NCI-E) License are selected, then max 5 QTY of NCI-E License can be selected per Server. Here, QTY of Paid Server: HCIAF220C-M6S = 3. Hence, QTY of NCI-E License allowed are 15.

Step 22.   

Related image, diagram or screenshot

a.     To complete the order, please check the box to the right to acknowledge and agree to the EULA Terms

b.    Click on “Review Changes” and “Done”

Step 23.   

Related image, diagram or screenshot

a.     NTX-SW-FRE (Free Nutanix Software) is pre-selected as its mandatory selection.

b.    Click on “Edit Options” to configure the product.

Step 24.  Subscription Term for NTX-SW-FRE is 36 to 60 Months.

Related image, diagram or screenshot

a.     Requested Start Date (RSD) is now dependent on HW Ship Date and will automatically starts when the HW ships. If you change the RSD, the Software will start either on the RSD you picked or the HW Ship Date whichever is later.

b.    End Date (duration in months) is defaulted to 36 Months, Auto Renewal (on/off) is defaulted to Off and Billing Frequency is defaulted to Prepaid Term. You can still change the setting accordingly.

Step 25.   

Related image, diagram or screenshot

a.     For NTX-SW-FRE (Free Nutanix Software), if Nutanix Cloud Infrastructure (NCI) or Nutanix Cloud Infrastructure Data (NCI-D) License are selected then they must match with the QTY of Processor Core selected under Free Server. Here, QTY of Free Server: HCIAF220C-M6S-FRE = 1. QTY of Processor: HCI-CPU-I6430 = 2 per Server i.e., 2 CPUs. Each CPU has 32 cores, total cores = 64. Hence, QTY of Nutanix Software License require = 64.

Note:       Note: Nutanix Software PID selected under NTX-SW-FRE must be same as Nutanix Software PID selected under NTX-SW.

Step 26.   

Related image, diagram or screenshot

a.     For NTX-SW-FRE (Free Nutanix Software), if Nutanix Cloud Infrastructure Edge (NCI-E) License are selected, then max 5 QTY of NCI-E License can be selected per Server. Here, QTY of Paid Server: HCIAF220C-M6S-FRE =1 Hence, QTY of NCI-E License allowed are 5.

Note:       Note: Nutanix Software PID selected under NTX-SW-FRE must be same as Nutanix Software PID selected under NTX-SW.

Step 27.   

Related image, diagram or screenshot

a.     To complete the order, please check the box to the right to acknowledge and agree to the EULA Terms

b.    Click on “Review Changes” and “Done”

Nutanix Professional Services SKU

Related image, diagram or screenshot

Step 28.   

Related image, diagram or screenshot

a.     It is recommended that User Purchase NTX-SW-PS. Please make selection by clicking     

b.    Click on Edit Options to configure the Product.

Step 29.   

Related image, diagram or screenshot

a.     We have NCI License selected under NTX-SW and hence, it is recommended that we select Nutanix Professional Services: NCI Design Workshop + NCI Cluster Deployment or Expansion SKUs.

b.    QTY of NCI Cluster Deployment or Expansion Variable SKU must match with Server QTY.

Step 30.   

Related image, diagram or screenshot

a.     To complete the order, please check the box to the right to acknowledge and agree to the EULA Terms

b.    Click on “Review Changes” and “Done”

Step 31.   

Related image, diagram or screenshot

a.     It is recommended that Term Duration for HW Support align with Software Subscription Duration.

b.    Intersight is a required selection if you have not previously purchased Cisco Intersight Software. Please make selection by clicking “PLUS” and click on “Edit Options” to configure.

Step 32.   

Related image, diagram or screenshot

a.     Requested Start Date (RSD) is now dependent on HW Ship Date and will automatically starts when the HW ships. If you change the RSD, the Software will start either on the RSD you picked or the HW Ship Date whichever is later.

b.    End Date (duration in months) is defaulted to 36 Months, Auto Renewal (on/off) is defaulted to Off and Billing Frequency is defaulted to Prepaid Term. You can still change the setting accordingly.

Step 33.   

Related image, diagram or screenshot

a.     The quantity of Cisco Intersight 2.0 Infrastructure Services License under Offer: DC-MGT-SAAS should be equal to the quantity of Server selected. Enter the quantity.

Step 34.   

Related image, diagram or screenshot

a.     The Cisco Intersight License comes with separate Support. Basic Embedded Support is the default selection. It is recommended that Customer should upgrade to Solution Support or CX Success Track L1 or L2 for the HW if Nutanix Mission Critical Software Support is purchased.

Step 35.   

Related image, diagram or screenshot

a.     Configuration for MLB is completed when status of each Product is Valid and warning messages are cleared.

b.    Click on the “PLUS” to expand and view the selections made for each Product.

c.     Click on “Done” to complete MLB configuration.

Step 36.   

Related image, diagram or screenshot

a.     CNDL-DESELECT is meant to select only if Customer has already purchased Cisco Intersight License via EA Contract or order is for Disti Fulfillment. Please make selection by clicking “PLUS”.

b.    Please note that Intersight is required selection and needed for the Server to function. Click on Select Options to configure.

Step 37.   

Related image, diagram or screenshot

a.     Please select appropriate Reason Code

Step 38.   

Related image, diagram or screenshot

a.     Configuration for MLB is completed when status of each Product is Valid and warning messages are cleared.

b.    Click on the “PLUS” to expand and view the selections made for each Product.

c.     Click on “Done” to complete MLB configuration.

Nutanix Software Provisioning Details

Enter the provision details in the below fields.

A screenshot of a computerDescription automatically generated

Enter the end user’s Information In the below fields.

A screenshot of a computerDescription automatically generated

Find the below filled out form for the reference/example.

A screenshot of a computerDescription automatically generated

Additional Resources

Spec sheets:

Cisco Compute Hyperconverged with Nutanix-HCIAF220 M6 All-NVMe/All-Flash Server

Cisco Compute Hyperconverged with Nutanix-HCIAF240 M6 All-Flash Server

Nutanix Sizer Tool

Sizer user guide: https://portal.nutanix.com/page/documents/details?targetId=Sizer-User-Guide:Sizer-User-Guide

Nutanix Professional Services: https://www.nutanix.com/content/dam/nutanix/resources/datasheets/professional-services-service-descriptions.pdf

Nutanix SW Options: https://www.nutanix.com/products/cloud-platform/software-options

Learn more